Solar Cable-12AWG (UL4703)
(NO.7194202) |
| General characteristics: |
 |
| Appllcation: |
Specifically designed for connecting photovoltaic system components inside and outside of building
and equipment with high mechanical requirements and extreme weather conditions.For permanent installations. |
Cable Construction: |
| Conductor | | |
| Metarial: | Tinned annealed copper |
| AWG : | 12 |
| Construction(N/mm) : | 65/0.254±0.006 |
| Conductor(Dia./mm) : | 2.36 |  |
| Insulation | |
| Standard thickness (mm) : |
1.22 |
| Standard diameter (mm) : | 4.80±0.1 |
| Jacket | |
| Standard thickness (mm) : | 0.8 |
| Outer diameter (mm) : | 6.40±0.2 |
| Conductor resistance(20℃) : | 5.64 |
| Weight rated | 69.83 |
| Making | ZION COMMUNICATION PV Wire 12AWG 90℃ Dry and Wet
600V Sun Res -40℃ VW-1 Solar Cable |
| | | | | | | |
| Package: |
| BOX (art.code ZC-100-12AWG/ZC-500-12AWG) | 
|
| |
| PALLET (art.code ZC-100-12AWG) |
| Size: |
| Amount of boxes on one pallet: | |
| Weight of total pallet: | |
| Cable length pallet: | |
| |
| Electrical properties |
| Ambient Temperature: | -40℃~+90℃ |
| Max.Temperature at conductor: | +120℃ |
| Service life: | ＞25 years ( -40℃~+90℃) |
| Insulation resistance (90℃) | ≥1011 |
| Withstand voltage(V/5min) | AC6500 |
| Speak voltage(V/5min) | AC6500 |
| Min bending radius(mm) | 5*D |
| |
| Main performance parameter of finished cable |
| Voltage test of finished cable |
| Min.time of dipping in water | ≥1(h) |
| Testing voltage (AC) | 6500(V) |
| Min.voltage applying time at one time | 5(min) |
| Test result | no breakdown |
| Sheated surface resistance |
| Length of specimen: | 250mm |
| Test result | ≥109Ω |
| Penetrate the insulation resistance |
| Temperature | 20℃ |
| Test result | ≥1014Ω |
| High temperature stress |
| Temperature | 140℃ |
| A: with 1.2 Voltage test | A: No breakdown |
| B: deep pressure | B: Wall thickness 50% |
| Damp-heat test |
| Temperature | 90℃ |
| Humidity | 0.85 |
| Aging before and after the tenslle strength of Change | ≤30% |
| Aging before and after the elongation at break of Change | ≤-30% |
| | | | | | | | |
| | | | | | | | |
| |
| Acid-alkali Resistance |
| Min.time of dipping in | 168h |
| Aging before and after the tensile strength of Change | ≤-30% |
| Elongation | ≥100 |
| Low-temperature bending |
| Temperature | -40℃ |
| Time | 16h |
| Test result | No crack |
| Ozone resistance |
| Ozeone concentration % | (200±50)x10-6 |
| Time | 72h |
| Test result | No crack |
| Heat schrinkable jacket test |
| Test result | ≤2% |
| Flame retardant-Vertical burn | |
| Flxture on the lower edge from the starting point and carbonization | ≥50mm |
| Burning fuel downward from the lower edge of bottom fixture | ≤540mm |
| Halogen content of non-metallic materials |
| Test result | |
| Chlorine and bromine content | HCL≤0.5HBr≤0.5% |
| Fluoride content | F≤0.1% |
| The inner layer of insulation and sheath of the mechanical properties |
| Test result | |
| Aging before tensile strength | 8.0N/mm² |
| Aging before elongation | 1.25 |
| Aging before and after the tensile strength of change | -30% |
| Aging before and after the elongation at break of change | -30% |
| Hot extension |
| Temperature | 200℃ |
| Test result-The inner layer of insulation and sheath | |
| Elongation under load | ≤100% |
| Elongation after unloading | ≤25% |
